谢敏

发布者：张佳勇发布时间：2024-01-04浏览次数：10

谢敏Xie Min 特聘副研究员

所属学院：材料与环境工程学院-磁性材料研究院

专业与研究方向：磁性功能材料

谢敏，女，1993.10，特聘副研究员。2021.06月毕业于天津工业大学材料科学与工程学院，获材料科学与工程博士学位，2021.09-2023.11，就职于上海交通大学材料科学与工程学院博士后。2023.12加入bob电竞ios 材料与环境工程学院。全国增材制造委员会青年工作组委员。主要研究方向为激光增材制造Cu基偏晶合金凝固机制与性能调控研究。目前已在Journal of Materials Science & Technology、Journal of Materials Research and Technology、 Journal of Alloys and Compounds等期刊发表SCI论文19篇，授权和公开中国发明专利3项。参与国家级/国家重点研发计划2项。

近三年代表性论文：

[1] M Xie, F Li*, et al. (2023). Effect of laser energy density on microstructure and properties Cu-Fe-P immiscible alloys fabricated by laser selective melting: Heterogeneous and high strength and magnetic. Journal of Materials Research and Technology. 2023, 26: 2759-2969.

[2] M Xie, S F Zhou*, et al. (2022). Selective laser melting of bulk immiscible alloy with enhanced strength: Heterogeneous microstructure and deformation mechanisms, Journal of Materials Science and Technology, 104: 81-87.

[3] M Xie, F Li*, et al. (2022). Effect of Si element and TiB₂ nucleating agent on microstructure and magnetic properties of Cu-based immiscible composites by laser melting deposition, Journal of Alloys and Compounds, 934: 167938.

[4] M Xie *, et al. (2022). Graphene nanoplatelets reinforced NiCu composite manufactured by laser melting deposition, Journal of Alloys and Compounds, 929: 167261.

[5] M Xie, S F Zhou*, et al. (2021). TiB₂- and Fe₂P with nanotwins-reinforced Cu-based immiscible composites fabricated by selective laser melting: Formation mechanism and wear behavior. Journal of Alloys and Compounds, 864: 158716.

代表性专利：

[1] 周圣丰，戴晓琴，谢敏. (2019) 一种激光选区熔化成形中空富铁颗粒增强铜基偏晶合金的方法. CN 108080636 B.

[2] 周圣丰，戴晓琴，谢敏. (2019) 一种激光选区熔化成形大尺寸高性能偏晶合金的方法. CN 107900341 B.

[3] 周圣丰，谢敏，王小健. (2019) 一种激光选区熔化成形块体纳米孪晶铜基复合材料的方法. 201910670548.X.

主要荣誉：

谢敏

[1] M Xie, F Li*, et al. (2023). Effect of laser energy density on microstructure and properties Cu-Fe-P immiscible alloys fabricated by laser selective melting: Heterogeneous and high strength and magnetic. Journal of Materials Research and Technology. 2023, 26: 2759-2969.

[2] M Xie, S F Zhou*, et al. (2022). Selective laser melting of bulk immiscible alloy with enhanced strength: Heterogeneous microstructure and deformation mechanisms, Journal of Materials Science and Technology, 104: 81-87.

[3] M Xie, F Li*, et al. (2022). Effect of Si element and TiB₂ nucleating agent on microstructure and magnetic properties of Cu-based immiscible composites by laser melting deposition, Journal of Alloys and Compounds, 934: 167938.

[4] M Xie *, et al. (2022). Graphene nanoplatelets reinforced NiCu composite manufactured by laser melting deposition, Journal of Alloys and Compounds, 929: 167261.

[5] M Xie, S F Zhou*, et al. (2021). TiB₂- and Fe₂P with nanotwins-reinforced Cu-based immiscible composites fabricated by selective laser melting: Formation mechanism and wear behavior. Journal of Alloys and Compounds, 864: 158716.

[1] 周圣丰，戴晓琴，谢敏. (2019) 一种激光选区熔化成形中空富铁颗粒增强铜基偏晶合金的方法. CN 108080636 B.

[2] 周圣丰，戴晓琴，谢敏. (2019) 一种激光选区熔化成形大尺寸高性能偏晶合金的方法. CN 107900341 B.

[3] 周圣丰，谢敏，王小健. (2019) 一种激光选区熔化成形块体纳米孪晶铜基复合材料的方法. 201910670548.X.

[1] 天津市“市级优秀学生” (2020)

[2] 国家奖学金 (2020)

谢敏

[1] M Xie, F Li*, et al. (2023). Effect of laser energy density on microstructure and properties Cu-Fe-P immiscible alloys fabricated by laser selective melting: Heterogeneous and high strength and magnetic. Journal of Materials Research and Technology. 2023, 26: 2759-2969.

[2] M Xie, S F Zhou*, et al. (2022). Selective laser melting of bulk immiscible alloy with enhanced strength: Heterogeneous microstructure and deformation mechanisms, Journal of Materials Science and Technology, 104: 81-87.

[3] M Xie, F Li*, et al. (2022). Effect of Si element and TiB2 nucleating agent on microstructure and magnetic properties of Cu-based immiscible composites by laser melting deposition, Journal of Alloys and Compounds, 934: 167938.

[4] M Xie *, et al. (2022). Graphene nanoplatelets reinforced NiCu composite manufactured by laser melting deposition, Journal of Alloys and Compounds, 929: 167261.

[5] M Xie, S F Zhou*, et al. (2021). TiB2- and Fe2P with nanotwins-reinforced Cu-based immiscible composites fabricated by selective laser melting: Formation mechanism and wear behavior. Journal of Alloys and Compounds, 864: 158716.

[1] 周圣丰，戴晓琴，谢敏. (2019) 一种激光选区熔化成形中空富铁颗粒增强铜基偏晶合金的方法. CN 108080636 B.

[2] 周圣丰，戴晓琴，谢敏. (2019) 一种激光选区熔化成形大尺寸高性能偏晶合金的方法. CN 107900341 B.

[3] 周圣丰，谢敏，王小健. (2019) 一种激光选区熔化成形块体纳米孪晶铜基复合材料的方法. 201910670548.X.

[1] 天津市“市级优秀学生” (2020)

[2] 国家奖学金 (2020)

[3] M Xie, F Li*, et al. (2022). Effect of Si element and TiB₂ nucleating agent on microstructure and magnetic properties of Cu-based immiscible composites by laser melting deposition, Journal of Alloys and Compounds, 934: 167938.

[5] M Xie, S F Zhou*, et al. (2021). TiB₂- and Fe₂P with nanotwins-reinforced Cu-based immiscible composites fabricated by selective laser melting: Formation mechanism and wear behavior. Journal of Alloys and Compounds, 864: 158716.